Dell PowerEdge R815 Hardware Owner's Manual - Page 136
board from the I/O board. See
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
4 Remove the cooling fan assembly. See "Removing the Cooling Fan Assembly" on page 102. 5 If applicable, remove the cables on the power distribution board. 6 Separate the system board and the I/O board to disengage the interconnect between the power distribution board and the I/O board: a Slightly lift the tab on the high-speed connector to free the release levers. See Figure 3-30. b Push the release levers at an angle of 90 degrees away from the connector to separate the system board and the power distribution board from the I/O board. See Figure 3-30. 7 Press the release tab in the direction of the arrow and slide the board upwards. See Figure 3-28. 8 Pull the power distribution board up until the securing slots on the board are free from the tabs on the chassis. See Figure 3-28. 136 Installing System Components