Dell PowerEdge R815 Hardware Owner's Manual - Page 97
Installing Memory Modules, WARNING, CAUTION
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Installing Memory Modules WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges. Avoid touching the components on the memory module and the connectors. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 If installed, remove the front bezel. See "Removing the Front Bezel" on page 75. 2 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3 Open the system. See "Opening the System" on page 76. 4 Remove the cooling shroud. See "Removing the Cooling Shroud" on page 88. 5 If applicable, slide the front-chassis assembly away from the chassis. See "Front-Chassis Assembly" on page 90. 6 Press down on the ejectors on each end of the socket until the memorymodule blank pops out of the socket. See Figure 3-11. NOTE: Ensure that you retain any removed memory-module blanks for future use. CAUTION: Handle each memory module only on either card edge, making sure not to touch the memory module components or connectors. Installing System Components 97