Dell PowerEdge R815 Hardware Owner's Manual - Page 44
Link Width is, Actual Link Width
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Message Causes Corrective Actions No boot sector on hard drive. Incorrect configuration settings in System Setup program, or no operating system on hard drive. Check the hard-drive configuration settings in the System Setup program. See "Using the System Setup Program and UEFI Boot Manager" on page 53. If necessary, install the operating system on your hard drive. See your operating system documentation. No timer tick interrupt. Faulty system board. See "Getting Help" on page 185. PCI BIOS failed to install. PCIe device BIOS (Option ROM) checksum failure detected during shadowing. Cables to expansion card(s) loose; faulty or improperly installed expansion card(s). Reseat the expansion card(s). Ensure that all appropriate cables are securely connected to the expansion card(s). If the problem persists, see "Troubleshooting Expansion Cards" on page 166. PCIe Training Error: Expected Link Width is x, Actual Link Width is y. Faulty or improperly installed Reseat the PCIe card in the PCIe card in the specified specified slot number. See slot. "Troubleshooting Expansion Cards" on page 166. If the problem persists, see "Getting Help" on page 185. Plug & Play Configuration Error. Error encountered in initializing PCIe device; faulty system board. Install the NVRAM_CLR jumper in the clear position (pins 1 and 3) and reboot the system. See Figure 6-1 for jumper location. If the problem persists, see "Troubleshooting Expansion Cards" on page 166. 44 About Your System