Dell PowerEdge R815 Hardware Owner's Manual - Page 82
Removing a Hard Drive From a Hard-Drive Carrier
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removing a Hard Drive From a Hard-Drive Carrier Remove the screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. See Figure 3-6. Figure 3-6. Removing and Installing a Hot-Swap Hard Drive Into a Hard-Drive Carrier 1 4 2 3 1 hard drive 3 SAS/SATA screw hole 2 hard-drive carrier 4 screws (4) Installing a Hard Drive Into a Hard-Drive Carrier 1 Insert the hard drive into the hard-drive carrier with the connector end of the drive at the rear. See Figure 3-6. 2 Align the screw holes on the hard drive with the back set of holes on the hard-drive carrier. 3 Attach the four screws to secure the hard drive to the hard-drive carrier. 82 Installing System Components
82
Installing System Components
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See
Figure 3-6
.
Figure 3-6.
Removing and Installing a Hot-Swap Hard Drive Into a Hard-Drive Carrier
Installing a Hard Drive Into a Hard-Drive Carrier
1
Insert the hard drive into the hard-drive carrier with the connector end
of the drive at the rear. See
Figure 3-6
.
2
Align the screw holes on the hard drive with the back set of holes on the
hard-drive carrier.
3
Attach the four screws to secure the hard drive to the hard-drive carrier.
1
hard drive
2
hard-drive carrier
3
SAS/SATA screw hole
4
screws (4)
1
2
3
4