Dell PowerEdge R815 Hardware Owner's Manual - Page 158
See General Memory Module Installation Guidelines
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
9 Check the memory channels and ensure that they are populated correctly. See "General Memory Module Installation Guidelines" on page 93. 10 Reseat the memory modules in their sockets. See "Installing Memory Modules" on page 98. 11 If applicable, replace the cooling shroud. See "Installing the Cooling Shroud" on page 89. 12 If applicable, slide the front chassis back. See "Front-Chassis Assembly" on page 90. 13 Close the system. See "Closing the System" on page 77. 14 Reconnect the system to its electrical outlet, and turn on the system and attached peripherals. 15 Enter the System Setup program and check the system memory setting. See "Memory Settings Screen" on page 57. If the problem is not resolved, proceed with the next step. 16 If a diagnostic test or error message indicates a specific memory module as faulty, swap or replace the module. 17 Open the system. See "Opening the System" on page 76. 18 If applicable, move the front chassis assembly. See "Front-Chassis Assembly" on page 90. 19 If applicable, remove the cooling shroud. See "Removing the Cooling Shroud" on page 88. 20 To troubleshoot an unspecified faulty memory module, replace the memory module in the first DIMM socket with a module of the same type and capacity. See "Installing Memory Modules" on page 98. 21 If applicable, replace the cooling shroud. See "Installing the Cooling Shroud" on page 89. 22 If applicable, slide the front chassis back. See "Front-Chassis Assembly" on page 90. 23 Close the system. See "Closing the System" on page 77. 24 Reconnect the system to its electrical outlet, and turn on the system and attached peripherals. 160 Troubleshooting Your System