Dell PowerEdge R815 Hardware Owner's Manual - Page 165
See Installing an Expansion Card on For each expansion card you removed in step 10
View all Dell PowerEdge R815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
5 Ensure that each expansion card is firmly seated in its connector. See "Installing an Expansion Card" on page 109. 6 Close the system. See "Closing the System" on page 77. 7 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 8 If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 9 Open the system. See "Opening the System" on page 76. 10 Remove all expansion cards installed in the system. See "Removing an Expansion Card" on page 111. 11 Close the system. See "Closing the System" on page 77. 12 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 13 Run the appropriate online diagnostic test. If the tests fail, see "Getting Help" on page 185. 14 For each expansion card you removed in step 10, perform the following steps: a Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. b Open the system. See "Opening the System" on page 76. c Reinstall one of the expansion cards. d Close the system. See "Closing the System" on page 77. e Run the appropriate diagnostic test. If the tests fail, see "Getting Help" on page 185. Troubleshooting Your System 167