Epson PowerLite 735c User Manual - Page 102
Replacing the Lamp
View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If your projector is mounted on the ceiling, you should unmount it before accessing the lamp compartment. This makes it easier for you to replace the lamp and minimizes the chance of any small glass fragments dropping from the projector. Replacing the Lamp The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp when: ■ The projection image gets darker or starts to deteriorate. ■ The lamp warning light is red or flashing red. ■ The message LAMP REPLACE appears on the screen when the lamp comes on (after about 1400 hours of use). To maintain projector brightness and image quality, replace the lamp as soon as possible. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L18. In Canada, please call (800) 463-7766 for dealer referral Follow these steps to replace the lamp: 1. Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord. 2. Allow the projector to cool for at least half an hour (if it has been on). 3. Turn the projector over, then release the tabs to remove the cover. 96 Maintaining the Projector