Epson PowerLite 735c User Manual - Page 39
tab and make sure that the network card or, Make sure encryption is
View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Click the Advanced tab. You see a screen similar to this: 5. Check your network card's device settings. (Depending on the type of card or wireless transmitter you're using, some of the settings may be described differently from those listed here.) ■ Set the network type to 802.11 Ad Hoc. ■ Set the SSID to match the name you assigned to the projector's ESSID-for example, CONF ROOM. (If your network card uses channel mode instead, set the correct channel, 1 to 11, so it matches that of the projector.) ■ Make sure encryption is Disabled. 6. Click the General tab and make sure that the network card or wireless network device is enabled. 7. When done making the settings, click OK to close the network card's properties dialog box. Now you're ready to connect to the projector. See "Running NS Connection" on page 42. Presenting Through a Wireless Network 33