Epson PowerLite 735c User Manual - Page 44
settings may be described differently from those listed here., Set the network type
View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
You see a screen similar to this: Click here 3. Click the Configure button. 4. Click the Advanced tab. You see a screen like this: 5. Check your network card's device settings. (Depending on the type of card or wireless transmitter you're using, some of the settings may be described differently from those listed here.) ■ Set the network type to Infrastructure. ■ Set the SSID to match the name assigned to the access point-for example, CONF ROOM. ■ Make sure encryption is Disabled. 38 Presenting Through a Wireless Network
38
Presenting Through a Wireless Network
You see a screen similar to this:
3.
Click the
Configure
button.
4.
Click the
Advanced
tab. You see a screen like this:
5.
Check your network card’s device settings. (Depending on the
type of card or wireless transmitter you’re using, some of the
settings may be described differently from those listed here.)
■
Set the network type to
Infrastructure
.
■
Set the SSID to match the name assigned to the access
point—for example,
CONF ROOM
.
■
Make sure encryption is
Disabled
.
Click here