Epson PowerLite 735c User Manual - Page 14
Positioning the Projector - mount
View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
note You can mount the projector on the ceiling, or place it behind a translucent screen for rear projection. See page 117 for details. Positioning the Projector If you're setting up the projector yourself and it isn't already installed in the theater or conference room you're using, you'll probably want to place it on a table in front of the screen, as shown. x art below This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it. Try to leave as much space as possible between the projector and the screen to get a good-size image. Use the figure below to help you determine placement. Image size increases with distance, but can vary depending on how you position the zoom ring and whether you've adjusted the image with other settings. 33 to 38.5 ft 6.5 to 7.5 ft 3 to 4 ft distance from screen Also keep these considerations in mind: ■ Place the projector on a sturdy, level surface. ■ Make sure there is plenty of space for ventilation around and under the projector. Do not set the projector on top of loose papers that could block the vents under the projector. ■ Make sure the projector is within 10 feet of a grounded electrical outlet or extension cord. 8 Displaying and Adjusting the Image