Epson PowerLite 735c User Manual - Page 111
Solving Problems with the ImageorSound
View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the P power light is green, not flashing, and the lens cap is off. ■ The projector may be in sleep mode. If the P power light is orange, press the Power button to turn the projector on. ■ If the power was switched off and then on again, the projector may still be cooling down. Wait until the power light stops flashing and remains orange; then press the Power button again. ■ Try pressing the other Power button on the remote control or on the projector. ■ Press the A/V Mute button to make sure the picture has not been turned off temporarily. ■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. You've connected a computer and see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described in Chapter 4. ■ Try restarting your computer. ■ If you've connected a computer and one or more video sources, you may need to press the Source button (on the projector) or the Comp/EasyMP or S-Video/Video button (on the remote control) to select the correct source. Allow a few seconds for the projector to sync up after pressing the button. Solving Problems 105