Epson PowerLite 735c User Manual - Page 103

caution, Replace the lamp cover. The projector won't come on if the lamp

Get Epson PowerLite 735c PDF manuals and user guides View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

4. Use a screwdriver to loosen the two silver screws holding the lamp in place. (You can't remove these screws.) 5. Grasp the lamp as shown and pull it straight out. 6. Gently insert the new lamp. 7. Once the lamp is fully inserted, tighten its screws. 8. Replace the lamp cover. (The projector won't come on if the lamp cover is loose.) caution Do not touch the glass portion of the new lamp assembly. Touching the glass could result in premature lamp failure. Continue on to the next section to reset the lamp timer. Maintaining the Projector 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Maintaining the Projector
97
4.
Use a screwdriver to loosen the two silver screws holding the lamp
in place. (You can’t remove these screws.)
5.
Grasp the lamp as shown and pull it straight out.
6.
Gently insert the new lamp.
7.
Once the lamp is fully inserted, tighten its screws.
8.
Replace the lamp cover. (The projector won’t come on if the lamp
cover is loose.)
Continue on to the next section to reset the lamp timer.
caution
Do not touch the glass
portion of the new lamp
assembly. Touching the glass
could result in premature
lamp failure.