HP Integrity rx2800 HP Integrity iLO 3 Operations Guide - Page 10
Integrity iLO 3 features, Always-on capability, Multiple access methods, Mirrored console
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
• Monitoring of server health and status • Display of detailed information about the various internal subsystems and field replaceable units (FRUs) • At-a-glance virtual front panel to monitor system status and see the state of front panel LEDs • Display and recording of system events with 4X larger console log to capture more administrative information • Scalable management: automatically grows with your multi-bladed Integrity servers, easily managed through a consolidated iLO interface Integrity iLO 3 advanced features provide additional functionality such as 3X faster virtual media with higher performance file transfers and updates. In addition, the advanced features increase security by integrating iLO 3 user administration with the Active Directory or eDirectory. Integrity iLO 3 advanced features are enabled automatically on every Integrity server equipped with iLO 3. The Integrity iLO 3 Advanced Pack license is built into every system. No additional licensing is needed. Integrity iLO is completely independent of the host system and the operating system. It has its own microprocessor and runs its own firmware. The operating system cannot send packets out on the MP LAN, and packets on the MP LAN cannot go to the operating system. The MP LAN is exclusive to iLO and is driven by an embedded real-time operating system (RTOS) running on iLO. NOTE: The following ProLiant iLO 3 features are not available on Integrity iLO 3: • Virtual Folder • Shared LAN • Graphics Console Replay Integrity iLO 3 features Always-on capability Integrity iLO 3 is active and available through the connections of the iLO MP LAN and the local serial port as long as the power cord is plugged in. In the event of a complete power failure, iLO 3 data is protected by an onboard battery backup. Multiple access methods Access methods, with the exception of the serial console, can be enabled or disabled. The available methods to access iLO 3 are as follows: LAN Using Telnet, web, or SSH to access the iLO MP LAN NOTE: Integrity iLO 3 ships with Telnet disabled by default. Local serial port Web Using a terminal or laptop computer for direct connection Using a graphical user interface (GUI) Mirrored console The system console output stream is reflected to all connected console users. Any user with write access can provide input. Remote power and reset Integrity iLO 3 enables you to view and control the power state of the server. It also provides options to reset the system or iLO 3. 10 Introduction