HP Integrity rx2800 HP Integrity iLO 3 Operations Guide - Page 33

Configuring DNS, Configuring LDAP extended schema, current DNS

Get HP Integrity rx2800 - i2 PDF manuals and user guides View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

• Modify the MP gateway address. [hostname] CM:hpiLO-> LC -g 192.0.2.1 • Set the link state to auto negotiate. [hostname] CM:hpiLO-> LC -link auto • Set the link state to 10 BaseT. [hostname] CM:hpiLO-> LC -link x (Other option is -link c (100BaseT)) • Set the remote console serial port address. [hostname] CM:hpiLO-> LC -rsc n • Set the SSH console port address. [hostname] CM:hpiLO-> LC -ssh 22 Configuring DNS To use the DNS command to display and modify the DNS configuration: 1. From the MP Main Menu, enter command mode. 2. At the CM:hpiLO-> prompt, enter DNS. The screen appears current DNS data. 3. To select all parameters, enter A when prompted. The screen displays the current DHCP for DNS server status. 4. When prompted, enter Enabled or Disabled. The screen displays the current DHCP for DNS domain name status. 5. When prompted, enter Enabled or Disabled. The screen displays the current register with DDNS server value. 6. When prompted, enter Yes or No. The screen displays the current DNS domain name. 7. When prompted, enter a new value. The screen displays the primary DNS server IP address. 8. When prompted, enter a new value. The screen displays the optional secondary DNS server IP address. 9. When prompted, enter a new value. The screen displays the optional tertiary DNS server IP address. 10. When prompted, enter a new value. The DNS configuration is updated as follows: New DNS Configuration (* modified values): * S - DHCP for DNS Servers : Disabled * D - DHCP for DNS Domain Name : Disabled R - Register with DDNS Server : Yes * N - DNS Domain Name : mpdns.company.com * 1 - Primary DNS Server IP : 192.0.2.1 2 - Secondary DNS Server IP : Enter parameter(s) to revise, Y to confirm, or [Q] to Quit: Y -> DNS Configuration has been updated [mpserver] CM:hpiLO-> Configuring LDAP extended schema The following procedure describes how to configure iLO 3 to use a directory server to authenticate a user login using the iLO 3 MP TUI. Configuring DNS 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
•
Modify the MP gateway address.
[hostname] CM:hpiLO-> LC -g 192.0.2.1
•
Set the link state to auto negotiate.
[hostname] CM:hpiLO-> LC -link auto
•
Set the link state to 10 BaseT.
[hostname] CM:hpiLO-> LC -link x
(Other option is -link c (100BaseT))
•
Set the remote console serial port address.
[hostname] CM:hpiLO-> LC -rsc n
•
Set the SSH console port address.
[hostname] CM:hpiLO-> LC -ssh 22
Configuring DNS
To use the DNS command to display and modify the DNS configuration:
1.
From the MP Main Menu, enter command mode.
2.
At the
CM:hpiLO->
prompt, enter
DNS
. The screen appears
current DNS
data.
3.
To select all parameters, enter
A
when prompted. The screen displays the current DHCP for
DNS server status.
4.
When prompted, enter
Enabled
or
Disabled
. The screen displays the current DHCP for
DNS domain name status.
5.
When prompted, enter
Enabled
or
Disabled
. The screen displays the current register with
DDNS server value.
6.
When prompted, enter
Yes
or
No
. The screen displays the current DNS domain name.
7.
When prompted, enter a new value. The screen displays the primary DNS server IP address.
8.
When prompted, enter a new value. The screen displays the optional secondary DNS server
IP address.
9.
When prompted, enter a new value. The screen displays the optional tertiary DNS server IP
address.
10. When prompted, enter a new value.
The DNS configuration is updated as follows:
New DNS Configuration (* modified values):
* S - DHCP for DNS Servers
: Disabled
* D - DHCP for DNS Domain Name
: Disabled
R - Register with DDNS Server : Yes
* N - DNS Domain Name
: mpdns.company.com
* 1 - Primary DNS Server IP
: 192.0.2.1
2 - Secondary DNS Server IP
:
Enter parameter(s) to revise, Y to confirm, or [Q] to Quit: Y
-> DNS Configuration has been updated
[mpserver] CM:hpiLO->
Configuring LDAP extended schema
The following procedure describes how to configure iLO 3 to use a directory server to authenticate
a user login using the iLO 3 MP TUI.
Configuring DNS
33