HP LX195 HP LX195 MediaSmart Server - User Guide - Page 9

Getting Started Key Steps for Setting up Your Server Complete the following steps to set up the HP MediaSmart Server on your home network. To set up the HP MediaSmart Server 1. Connect the HP MediaSmart Server to your network and turn it on. For additional information, see Connecting the Server. 2. Update the trusted programs list for any firewall or anti-virus software on your computer. For additional information, see Updating Your Firewall's Trusted Program List. 3. Install the HP MediaSmart Server software on one computer. For additional information, see Installing the First Computer. 4. Install the HP MediaSmart Server software on additional computers. For additional information, see Installing Additional Computers. Finding a Home for Your Server Server Location Find a suitable place to locate your HP MediaSmart Server before you install the software on your computers. The location you choose must have either an available wired network connection to your broadband router or a switch connected to your broadband router. The server also requires adequate ventilation to ensure it does not get too hot: • Do not locate the server in an unventilated space. • Make sure that the server's front and back panels are not blocked. • Check that the location of the server is not too hot. Maximum environmental temperature for operating the server is 35 °C (95 °F). Network Requirements To successfully use the HP MediaSmart Server, your network must meet the following requirements: Network Requirements Requirement Recommended Server connection 100 Mbps to 1000 Mbps (Gigabit Ethernet) wired connection Home computers One or more computers running a supported operating system with a wired or wireless network connection. For a list of supported operating systems, see 3