HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 129

restore defaults Description Restores the default configuration to the controllers. For use by or with direction from a service technician. For details about which settings are restored see "Settings changed by restore defaults" (page 505). If the system contains only one controller module when the command is issued, the system's redundancy mode will be set to Single Controller mode. CAUTION: This command changes how the system operates and might require some reconfiguration to restore host access to volumes. Syntax restore defaults [noprompt] [prompt yes|no] Parameters noprompt Optional in console format; required for XML API format. Suppresses the confirmation prompt, which requires a yes or no response. Specifying this parameter allows the command to proceed without user interaction. prompt yes|no Optional. Specifies an automatic response to the confirmation prompt: • yes: Allow the command to proceed. • no: Cancel the command. If this parameter is omitted, you must manually reply to the prompt. Example Restore the controllers' default configuration: # restore defaults WARNING: The configuration of the array controller will be reset to default settings. The Management Controller will restart once this is completed. Do you want to continue? (y/n) yes Success: Command completed successfully. - Device default configuration was restored. See also • reset smis-configuration • restart restore defaults 129