HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 506
Settings changed by restore defaults continued, Table 100
![]() |
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 506 highlights
Table 100 Settings changed by restore defaults (continued) Setting Value SMTP settings: • Email notification • Email notify filter • Email addresses • Email server • Email domain • Email sender • Log destination • Include logs SSL/SSH certificates • Disabled • (none) • (none) • (none) • (none) • (none) • (none) • Disabled (preserved)6 Licenses (preserved) Vdisk metadata (preserved) Host port settings: • FC link speed • FC topology Host names and profiles • Auto • Point-to-point (preserved)7 Drive spin down Disabled Advanced settings: • Vdisk background scrub • Partner firmware upgrade • Utility priority • SMART • Dynamic spare configuration • Enclosure polling rate • Supercap failure • CompactFlash failure • Auto write back • Disk background scrub • Enabled • Enabled • High • (preserved)8 • Disabled • 5 seconds • Enabled • Enabled • Enabled • Disabled Native Command Queuing (NCQ) Enabled Managed Logs Disabled 1. Factory default: no tasks or schedules. 2. Factory default: no remote system definitions. 3. Factory default: MC logs are cleared. 4. Factory default: NTP is disabled; NTP host IP address is 0.0.0.0; NTP offset is 0. 5. Factory default: IP addresses are released. 6. Factory default: certificates are initialized. 7. Factory default: host names and profiles are cleared. 8. Factory default: no action for all disks. 506 Settings changed by restore defaults
![](/manual_guide/products/hewlettpackard-msa-1040-hp-msa-1040-cli-reference-guide-762782001-2014-9b93910/506.png)