HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 34
add replication-volume, volume, system, WWNNs, replication-set - iscsi requirements
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
add replication-volume Description Adds an existing secondary volume to a replication set. The volume can be in the same system as the primary volume or in a remote system. A secondary volume is a master volume created specifically for use as the destination for a replication by using the create master-volume command's prepare-replication-volume parameter. Secondary volumes serve as the destination for replicated data from the primary volume. When a replicate snapshot or replicate volume command is issued, data is replicated from the primary volume to the associated secondary volume in the replication set. This command must be run on the primary system. Syntax add replication-volume link-type FC|iSCSI [max-queue #] [nowait] primary-volume volume [priority low|medium|high] [remote-system system] secondary-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs [set replication-set] replication-volume Parameters link-type FC|iSCSI Specifies the type of ports being used for the inter-system link: • FC: FC ports • iSCSI: iSCSI ports max-queue # Optional. The number of replication images to consider when determining the next image to replicate: 1-64. Used only if the on-collision parameter is set to oldest. nowait Optional. Adding a volume to a replication set can take the Storage Controller several minutes to complete. This parameter allows that processing to continue in the background so the Management Controller can process other commands. primary-volume volume The name or serial number of the replication volume to be the primary volume for the replication set. priority low|medium|high Optional. The priority of the replication process on the replication volume: low, medium, or high. remote-system system Optional for a local volume; required for a remote volume if the secondary-address parameter is not specified. The name or network-port IP address of the remote system. secondary-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs Optional for a local volume; required for a remote volume if the remote-system parameter is not specified. Specifies host ports in the remote system by IP address, World Wide Node Name, or World Wide Port Name. An IP address value can include a port number; for example, 10.134.2.1:3260. Multiple values must be separated by commas and no spaces; for example: ip=10.134.2.1,10.134.2.2. set replication-set Optional. The name or serial number of the replication set. replication-volume The name or serial number of the secondary volume to add. If the name is not unique across replication sets, specify the set parameter. 34 Alphabetical list of commands