HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 448
sas-status-controller-a properties continued, Table 66
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 448 highlights
Table 66 sas-status-controller-a properties (continued) Name Type Description status-numeric elem-status elem-statusnumeric elem-disabled elem-disablednumeric elem-reason uint32 Numeric equivalents for status values. • 0: Unavailable • 1: Enabled - Healthy • 2: Enabled - Degraded • 3: Disabled string The SES status that corresponds to the PHY status. • Disabled: Critical condition is detected. • Error: Unrecoverable condition is detected. Appears only if there is a firmware problem related to PHY definition data. • OK: Element is installed and no error conditions are known. • Non-critical: Non-critical condition is detected. • Not Used: Element is not installed in enclosure. • Unknown: Either: • Sensor has failed or element status is not available. Appears only if an I/O module indicates it has fewer PHYs than the reporting I/O module, in which case all additional PHYs are reported as unknown. • Element is installed with no known errors, but the element has not been turned on or set into operation. uint32 Numeric equivalents for elem-status values. • 0: Error • 1: OK • 2: Disabled • 3: Non-critical • 4: Error • 5: Not Used • 6: Unknown • 7: Unknown • 8: Unknown string • Enabled: PHY is enabled. • Disabled: PHY is disabled. uint32 Numeric equivalents for elem-disabled values. • 0: Enabled • 1: Disabled string More information about the status value. • Blank if elem-status is OK. • Error count interrupts: PHY disabled because of error-count interrupts. • PHY control: PHY disabled by a SES control page as a result of action by a Storage Controller or user. • Not ready: PHY is enabled but not ready. Appears for SC-1 PHYs when the partner I/O module is not installed. Appears for Drive, SC-1, or Ingress PHYs when a connection problem exists such as a broken connector. • Drive removed: PHY disabled because drive slot is empty. • Unused - disabled by default: PHY is disabled by default because it is not used. • Excessive PHY changes: PHY is disabled because of excessive PHY change counts. 448 XML API basetype properties