HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 152
set enclosure, The enclosure ID.
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
set enclosure Description Sets an enclosure's name, location, rack number, and rack position. Set these parameters to values that help you identify and locate the enclosure. These values are used when user interfaces show enclosure-related data; for example, in output of the show enclosures command and in event-log entries related to enclosures. Syntax set enclosure [name new-name] [location location] [rack-number rack-number] [rack-position rack-position] enclosure-number Parameters name new-name A new name for the enclosure. The name can include a maximum of 20 bytes, using printable UTF-8 characters except a backslash, comma, double quote, or left angle bracket. A value that contains a space must be enclosed in double quotes. location location The location of the enclosure. The name can include a maximum of 20 bytes, using printable UTF-8 characters except a backslash, comma, double quote, or left angle bracket. A value that contains a space must be enclosed in double quotes. rack-number rack-number The number of the rack containing the enclosure, from 0-255. rack-position rack-position The enclosure's position in the rack, from 0-255. enclosure-number The enclosure ID. Example Set parameters for enclosure 1: # set enclosure 1 name Storage-5 location Lab rack-number 9 rack-position 3 Success: Command completed successfully. (2012-01-21 12:03:12) See also • show enclosures 152