HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 452

Table 68 security-communications-protocols properties (continued) Name Type Description snmp-numeric debug-interface debuginterfacenumeric inband-ses inband-sesnumeric activityprogress activityprogressnumeric uint32 Numeric equivalents for snmp values. • 0: Disabled • 1: Enabled string • Disabled: The Telnet debug port is disabled. This is the default. • Enabled: The Telnet debug port is enabled. Remote connection is allowed, through incoming ports only, by HP or HP's authorized representatives for troubleshooting. Disabling the service debug protocol removes this access. uint32 Numeric equivalents for debug-interface values. • 0: Disabled • 1: Enabled string • Disabled: The in-band SES interface is disabled. • Enabled: The in-band SES interface is enabled. This is the default. uint32 Numeric equivalents for inband-ses values. • 0: Disabled • 1: Enabled string • Enabled: Access to the activity progress interface via HTTP port 8081 is enabled. This mechanism reports whether a firmware update or partner firmware update operation is active and shows the progress through each step of the operation. In addition, when the update operation completes, status is presented indicating either the successful completion, or an error indication if the operation failed. • Disabled: Access to the activity progress interface via HTTP port 8081 is disabled. This is the default. uint32 Numeric equivalents for activity-progress values. • 0: Disabled • 1: Enabled 452 XML API basetype properties