HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 256
show ntp-status, show output-format (Deprecated), show port-wwn (Deprecated
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
show ntp-status Description Shows the status of the use of Network Time Protocol (NTP) in the system. Syntax show ntp-status Output NTP Status • activated: NTP is enabled • deactivated: NTP is disabled NTP Server Address • The current NTP server IP address if NTP is enabled. • The last-set NTP server IP address if NTP was enabled and has been disabled. • 0.0.0.0 if the NTP server IP address has not been set. Last Server Contact Date and time in the format year-month-day hour:minutes:seconds of the last message received from the NTP server; or none Example Show NTP status for the system: # show ntp-status NTP Status ---------NTP Status: activated NTP Server Address: 69.10.36.3 Last Server Contact: 2012-01-18 15:30:44 Success: Command completed successfully. (2012-01-18 15:39:41) Basetypes • ntp-status • status See also • set controller-date show output-format (Deprecated) Use show cli-parameters. show port-wwn (Deprecated) Use show ports. 256