HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 324

show volumecopy-status Description Shows information about in-progress volume copy operations. While a volume copy is in progress, the destination volume cannot be accessed. Syntax show volumecopy-status [controller a|b|both] Parameters controller a|b|both Optional. Shows volume copy operations for volumes owned by controller A only, by controller B only, or by either controller (both). If this parameter is omitted, all volume copy operations are shown. Output VC Volume Name Destination volume name Serial Number Destination volume serial number Vdisk Destination vdisk name Source Volume Source volume name Progress Percent complete of the volume copy Status • VC Online: A volume copy is in progress to the destination volume. • VC Offline: The source volume went offline while a volume copy was in progress. When the source volume comes back online, the copy process resumes from the point where it stopped. • Unknown: Status is unknown. Status-Reason More information about the Status value. Example Show information about volume copies in progress for controller A: # show volumecopy-status controller a VC Volume Name Serial Number Vdisk Source Volume Progress Status Status-Reason MV1-copy SN VD1 MV1 7% VC Online VC In Progress Success: Command completed successfully. (2014-01-01 17:14:05) Basetypes • volume-copy-status • status See also • abort volumecopy • volumecopy 324