HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 252

show master-volumes Description Shows information about all master volumes, or ones associated with a specified controller or snap pool. Syntax show master-volumes [controller a|b|both] [snap-pool volume] Parameters controller a|b|both Optional. Shows master volumes owned by controller A only, by controller B only, or by either controller (both). If this parameter is omitted, master volumes owned by either controller are shown. snap-pool volume Optional. Only includes master volumes associated with the specified snap pool name or serial number. For volume syntax, see "Command syntax" (page 20). Output Vdisk Vdisk name Serial Number Master volume serial number Name Master volume name Size Total size of the master volume Status Indicates whether the master volume is available or unavailable Status-Reason Shows --- for Available status, or a reason for Unavailable status: • MV Not Accessible: Master volume is not accessible • MV Not Found: Master volume is not found • RV: Replication volume (either a primary volume or a secondary volume) • RV Prepared: Replication-prepared volume, which could become a secondary volume in a replication set • SP Not Accessible: Snap pool is not accessible • SP Not Found: Snap pool is not found • Unknown Reason Snap-pool Name Name of the associated snap pool Snapshots Number of snapshots that exist for the master volume Snap Data Amount of snap-pool space occupied by this master volume for its associated snapshots (preserved and write data) Rollback Either the percent complete if rollback is in progress, or --- if rollback is not in progress 252