HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 468
system-parameters-table properties continued, Table 80
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 468 highlights
Table 80 system-parameters-table properties (continued) Name Type Description max-initiator max-volumegroups-per-pool max-volumesper-volumegroup maxreplicationsets max-enclosures localcontroller localcontrollernumeric serial-number externaltargetidcontrol externaltargetidcontrol-numeric lan-heartbeat lan-heartbeatnumeric ip-address-mode ip-addressmode-numeric debug-flags enclosure-flags num-globalspares dynamic-sparerescan-rate performancetuning-flags performancetuning-flagsnumeric uint32 Not applicable. uint32 Not applicable. uint32 Not applicable. uint32 Number of replication sets that the system supports. uint32 string uint32 string string Number of enclosures that the system supports. Controller you are currently logged in to. • A: Controller A. • B: Controller B. Numeric equivalents for local-controller values. • 0: B • 1: A Last five digits of the midplane serial number. Not used. uint32 Not used. string Not used. uint32 Not used. string • CAPI_TWO_IP_ADDRESSES_MODE: Dual controller system has a unique IP address for each controller. • CAPI_ONE_IP_ADDRESS_MODE: Dual controller system has the same IP address for both controllers, only one active at a time. uint32 Numeric equivalents for lan-heartbeat values. • 0: CAPI_TWO_IP_ADDRESSES_MODE • 1: CAPI_ONE_IP_ADDRESS_MODE uint32 For use by service personnel. uint32 For internal use only. uint32 Number of global-spare disks defined in the storage system. uint32 string Interval at which the system is scanned for disks automatically designated as spares, if the dynamic spares feature is enabled. For internal use only. uint32 Numeric equivalents for performance-tuning values. • 0: Disabled • 1: Enabled 468 XML API basetype properties