HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 242
Show port information for a system with FC ports, Example
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Example Show port information for a system with FC ports: # show host-parameters Ports Media Target ID Status Speed(A) Speed(C) Health Health Reason Health Recommendation ID FC(P) WWPN Up 8Gb Auto OK Topo(C) ------PTP ID FC(-) WWPN Disconnected Auto N/A There is no host connection to this host port. - If this host port is intentionally unused, no action is required. - Otherwise, use an appropriate interface cable to connect this host port to a switch or host. - If a cable is connected, check the cable and the switch or host for problems. Topo(C) ------PTP ... Success: Command completed successfully. (2013-02-03 17:01:03) Show port information for a system with iSCSI ports using IPv4: # show host-parameters Ports Media Target ID Status Speed(A) Speed(C) Health Health Reason Health Recommendation ID iSCSI IQN Up 1Gb Auto OK Port Details -----------IP Version: IPv4 IP Address: 10.134.9.100 Gateway: 10.134.0.1 Netmask: 255.255.0.0 MAC: 00:C0:FF:29:00:24 ... Success: Command completed successfully. (2013-06-25 02:18:16) 242