HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 425
port, Port WWN or IQN.
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 425 highlights
port This basetype is used by show ports. Table 50 port properties Name Type Description durable-id controller controllernumeric port port-type port-typenumeric media target-id status status-numeric actual-speed string string uint32 string string uint32 string string string uint32 string Controller host port ID in the form hostport_controller-ID-and-portnumber. • A: Controller A. • B: Controller B. Numeric equivalents for controller values. • 0: B • 1: A Controller ID and port number. • FC: Fibre Channel. • iSCSI: Internet SCSI. Numeric equivalents for port-type values. • 6: FC • 9: iSCSI • FC(P): Fibre Channel Point-to-Point. • FC(L): Fibre Channel-Arbitrated Loop (public or private). • FC(-): Not applicable, as when the port is disconnected. • iSCSI: Internet SCSI. Port WWN or IQN. Port status. • Up: The port is cabled and has an I/O link. • Warning: Not all of the port's PHYs are up. • Not Present: The controller module is not installed or is down. • Disconnected: Either no I/O link is detected or the port is not cabled. Numeric equivalents for status values. • 0: Up • 1: Warning • 3: Not Present • 6: Disconnected Actual link speed in Mbit/s or Gbit/s. • 10Mb • 100Mb • 1Gb • 1.5Gb • 2Gb • 3Gb • 4Gb • 6Gb • 8Gb • 10Gb • (blank): Port is disconnected. port 425