HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 292

Policy Recovery policy to invoke when threshold value is reached: • autoexpand: Try to expand the snap pool by the SizeToExpand value. If the snap pool's space usage reaches the percentage specified by its error threshold, the system will log Warning event 230 and will try to expand the snap pool by the snap pool's SizeToExpand value (below). • If the snap pool is successfully expanded, the system will log Informational event 444. • If the snap pool cannot be expanded because there is not enough available space in its vdisk, the system will log Warning event 444 and will automatically delete the oldest snapshot that is not a current sync point. Each time the snap-pool's error threshold is reached and the system cannot auto-expand the vdisk, the oldest remaining snapshot that is not a current sync point will be deleted. This behavior occurs for each snap pool independently, based on its space usage. • deleteoldestsnapshot: Delete the oldest snapshot. • deletesnapshots: Delete all snapshots. • haltwrites: Halt writes to the snap pool. • notifyonly: Generates an event to notify the administrator. SizeToExpand • size: For the autoexpand policy, the size by which to automatically expand the snap pool when the threshold is reached. • N/A: The policy is not set to autoexpand. Example Show information for snap pools owned by controller A: # show snap-pools controller a Vdisk Serial Number Name Size Free (size) Master Volumes Snapshots Status vd1 SN SP1 50.9GB 99 % (50.9GB) 1 2 Available Threshold %Usage Policy SizeToExpand Warning 75% Notify Only N/A Error 90% Auto Expand 9999.9MB Critical 98% Delete Snapshots N/A Success: Command completed successfully. (2013-02-13 15:27:07) Basetypes • snap-pools • status See also • create snap-pool • delete snap-pool • expand snap-pool • set snap-pool-policy • set snap-pool-threshold 292