HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 421
network-parameters, This basetype is used by, network-parameters properties - default ip address
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
network-parameters This basetype is used by show network-parameters. Table 47 network-parameters properties Name Type Description durable-id active-version ip-address gateway subnet-mask mac-address addressing-mode addressingmode-numeric link-speed link-speednumeric duplex-mode duplex-modenumeric autonegotiation autonegotiationnumeric health health-numeric health-reason healthrecommendation string uint32 string string string string string uint32 string uint32 string uint32 string uint32 string uint32 string string Controller network port ID in the form mgmtport_controller-ID. The configured network port IP version. • 4: IPv4 Controller network port IP address. Controller network port gateway IP address Controller network port IP subnet mask Controller network port MAC address. • Manual: Obtain network address from manual (static) settings. • DHCP: Use DHCP to obtain network address. This is the default. Numeric equivalents for addressing-mode values. • 1: Manual • 2: DHCP Not applicable. Not applicable. Not applicable. Not applicable. Not applicable. Not applicable. The health of the network connection. • OK • Degraded • N/A • Unknown Numeric equivalents for health values. • 0: OK • 1: Degraded • 3: Unknown • 4: N/A If Health is not OK, the reason for the health state. If Health is not OK, the recommended actions to take to resolve the health issue. network-parameters 421