HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 184
set syslog-parameters
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
set syslog-parameters Description Sets remote syslog notification parameters for events and managed logs. This allows events to be logged by the syslog of a specified host computer. Syslog is a protocol for sending event messages across an IP network to a logging server. Syntax set syslog-parameters notification-level crit|error|warn|info|none [host-ip IP-address] [host-port port-number] Parameters notification-level crit|error|warn|info|none The minimum severity for which the system should send notifications: • crit: Sends notifications for Critical events only. • error: Sends notifications for Error and Critical events. • warn: Sends notifications for Warning, Error, and Critical events. • info: Sends notifications for all events. • none: Disables syslog notification. If notification-level is other than none, host-ip must be specified. host-ip IP-address Optional. An IP address for the host. If notification-level is other than none, host-ip must be specified. host-port port-number Optional. A specific port number on the host. Example Set the system to send an entry to the remote server at 10.1.1.10 on port 514 when a critical event occurs: # set syslog-parameters notification-level crit host-ip 10.1.1.10 host-port 514 Info: Set Syslog IP to: 10.1.1.10 (10.1.1.10) Info: Set Syslog Port to: 514 (514) Info: Set Syslog Priority Level to: crit (crit) Success: Command completed successfully. (2012-07-27 15:07:46) See also • show syslog-parameters • test 184