HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 325
show volume-maps, Serial Number, Ports, no-access, Access, read-write, read-only, not-mapped
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
show volume-maps Description Shows mapping information for a specified volume or for all volumes. Syntax show volume-maps [volume] Parameters volume Optional. The name or serial number of the volume for which to show mappings. For volume syntax, see "Command syntax" (page 20). If this parameter is omitted, information for all volumes is shown. Output Volume information: Serial Number Volume serial number Name Volume name Mapping information: Ports • Controller host ports that the mapping applies to. • Blank if not mapped or mapped as no-access. LUN • LUN that identifies the volume to a host. • Blank if not mapped or mapped as no-access. Access Type of host access to the volume: • read-write: The host has read and write access to the volume. This is the default. • read-only: The host has read access to the volume. • no-access: The host is denied access to the volume. • not-mapped: The host is not mapped to the volume. Host-Port-Identifier • FC: Host WWPN • iSCSI: Host initiator node name (typically the IQN) • all other hosts for the volume's default mapping Nickname Host nickname, or blank if not set or for all other hosts Profile • Standard: Default profile. • HP-UX: The host uses Flat Space Addressing. Example Show all volume mappings: # show volume-maps Volume View [Serial Number (SN) Name (v2) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile A1,B1 101 read-write 207000c0ff001121 Host2 Standard A1 100 read-only 207000c0ff001122 Host1 Standard not-mapped all other hosts Standard Success: Command completed successfully. (2012-01-19 15:33:50) show volume-maps 325