HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 282
Remote link information, Example, Basetypes, See also, Connected Ports, Remote Address
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Remote link information: Connected Ports • For a remote primary or secondary volume, this field shows the IDs of up to two hosts ports in the local system that are connected to the remote system. If two ports are connected but only one is shown, this indicates that a problem is preventing half the available bandwidth from being used. • For a local primary or secondary volume, this field shows N/A. Remote Address The address of each host port in the remote system through which the volume is accessible. Example Show information about all replication volumes: # show replication-volumes Name Serial Number Status Status-Reason Monitor Location Primary-Volume Primary-Volume-Serial Primary-Volume-Status MaxQueue MaxRetryTime On Error Link Type On Collision Monitor Interval Priority Connection Status Connection Time vd01_v001 SN Online N/A OK Remote vd01_v001 SN Online 32 1800 Retry iSCSI Oldest 300 Medium Online 2018-01-18 10:04:00 Connected Ports Remote Address A1 IP=10.134.9.46:3260 IP=10.134.9.47:3260 IP=10.134.9.48:3260 A1 IP=10.134.9.49:3260 rvd01_v001 SN Online N/A vd01_v001 SN Online 1800 Retry iSCSI Oldest Medium Not Attempted N/A OK 300 Local 32 Connected Ports Remote Address N/A IP=10.134.9.40:3260 N/A IP=10.134.9.41:3260 N/A IP=10.134.9.42:3260 N/A IP=10.134.9.43:3260 Success: Command completed successfully. (2012-01-18 15:16:46) Basetypes • replication-volume • status See also • set replication-volume-parameters • show replication-sets 282