HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 462
snmp-parameters, This basetype is used by, snmp-parameters properties
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
snmp-parameters This basetype is used by show snmp-parameters. Table 76 snmp-parameters properties Name Type Description snmp-enabled snmp-enablednumeric snmp-filter snmp-filternumeric snmp-trap-host1 snmp-trap-host2 snmp-trap-host3 snmp-readcommunity snmp-writecommunity string uint32 string uint32 string Shows whether the Simple Network Management Protocol (SNMP) interface is enabled or disabled. • Disabled: SNMP is disabled. This is the default. • Enabled: SNMP is enabled. Numeric equivalents for snmp-enabled values. • 0: Disabled • 1: Enabled Minimum level of events to include for SNMP traps. • crit: Only critical events are sent as traps. • error: Error and critical events are sent as traps. • warn: Warning, error, and critical events are sent as traps. • info: All events are sent as traps. • none: No events are sent as traps and traps are disabled. This is the default. Numeric equivalents for snmp-filter values. • 0: none • 1: info • 2: error • 4: warn • 8: crit Trap host IP address. string Trap host IP address. string Trap host IP address. string string The community string for read-only access. The value is obscured for users having only the monitor role and is shown in clear text for users having the manage role. The community string for write access. The value is obscured for users having only the monitor role and is shown in clear text for users having the manage role. 462 XML API basetype properties