HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 406

fc-port This basetype is used by show ports and show host-parameters for a Fibre Channel port. Table 35 fc-port properties Name Type Description configuredtopology primary-loop-id sfp-status sfp-present sfp-presentnumeric sfp-vendor sfp-part-number sfp-revision sfp-supportedspeeds string string string string uint32 string string string string Configured topology. • Loop: Fibre Channel arbitrated loop (public or private). • PTP: Fibre Channel point-to-point. This is the default. • Auto: Loop preferred, otherwise point-to-point, based on the detected connection type. If the port is using loop topology and the port status is Up, this field shows the primary loop ID. If the port is not using loop topology or the port status is not Up, this field shows N/A. SFP status: • OK • Not present: No SFP is inserted in this port. • Not compatible: The SFP in this port is not qualified for use in this system. When this condition is detected, event 464 is logged. • Incorrect protocol: The SFP protocol does not match the port protocol. When this condition is detected, event 464 is logged. Shows whether the port contains an SFP. • Not Present • Present Numeric equivalents for sfp-present values. • 0: Not Present • 1: Present The SFP vendor. The SFP part number. The SFP revision. The link speeds that the SFP supports. 406 XML API basetype properties