HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 414
iscsi-parameters, This basetype is shown by, iscsi-parameters properties
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
iscsi-parameters This basetype is shown by show iscsi-parameters. Table 42 iscsi-parameters properties Name Type Description chap chap-numeric jumbo-frames jumbo-framesnumeric isns isns-numeric isns-ip isns-alt-ip iscsi-speed string uint32 string uint32 string uint32 string string string Shows whether Challenge-Handshake Authentication Protocol (CHAP) is enabled. • Enabled: CHAP is enabled. • Disabled: CHAP is disabled. This is the default. Numeric equivalents for chap values. • 0: Disabled • 1: Enabled Shows whether support for jumbo frames is enabled. • Enabled: Jumbo-frame support is enabled. • Disabled: Jumbo-frame support is disabled. This is the default. Numeric equivalents for jumbo-frames values. • 0: Disabled • 1: Enabled Shows whether support for Internet Storage Name Service (iSNS) is enabled. • Enabled: iSNS is enabled. • Disabled: iSNS is disabled. This is the default. Numeric equivalents for isns values. • 0: Disabled • 1: Enabled Address of the iSNS server. The default address is all zeroes. Address of the alternate iSNS server. The default address is all zeroes. iSCSI host port link speed. • auto: The proper speed is auto-negotiated. This is the default. • 1Gbps: The speed is forced to 1 Gbit/s, overriding a downshift that can occur during auto-negotiation with 1-Gbit/s HBAs. This setting does not apply to 10-Gbit/s HBAs. iscsi-speednumeric iscsi-ipversion uint32 uint8 Numeric equivalents for iscsi-speed values. • 0: auto • 1: 1Gbps iSCSI IP version. • 4: iSCSI host port addresses use IPv4 format. This is the default. • 6: iSCSI host port addresses use IPv6 format. 414 XML API basetype properties