HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 176

remote-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs Optional. The host port addresses associated with a replication volume. For the secondary system on which the command is run, you can specify host ports by IP address, World Wide Node Name, or World Wide Port Name. An IP address value can include a port number; for example, 10.134.11.10:3260. Multiple values must be separated by commas and no spaces; for example: ip=10.134.2.1,10.134.2.2. set replication-set Optional. The name or serial number of the replication set. replication-volume The name or serial number of the replication volume. If the name is not unique within the replication set, the local volume is assumed. If the name is not unique across replication sets, specify the set parameter. Example Set a new remote address and error policy for replication volume MV2 in replication set RS1: # set replication-volume-parameters remote-address ip=10.1.66.55 on-error suspend set RS1 MV2 Success: Command completed successfully. (2012-01-21 16:10:04) Assume you changed the addresses of host ports in secondary system Site2, which contains secondary volume rData. To update this address information for the replication set, run set replication-volume-parameters on the secondary system, specifying the secondary system's new addresses and the name of the secondary volume: # set replication-volume-parameters remote-address ip=10.20.5.27,10.30.5.27,10.20.5.37,10.30.5.37 rData See also • show replication-sets • show replication-volumes 176