HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 248
show iscsi-parameters, Description, Syntax, Output, Example
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
show iscsi-parameters Description For iSCSI, shows system-wide iSCSI parameters. Syntax show iscsi-parameters Output CHAP Shows whether Challenge-Handshake Authentication Protocol (CHAP) is enabled or disabled. • Enabled: CHAP is enabled. • Disabled: CHAP is disabled. This is the default. Jumbo Frames Shows whether support for jumbo frames is enabled or disabled. • Enabled: Jumbo-frame support is enabled. • Disabled: Jumbo-frame support is disabled. This is the default. iSNS Shows whether support for Internet Storage Name Service (iSNS) is enabled or disabled. • Enabled: iSNS support is enabled. • Disabled: iSNS support is disabled. This is the default. iSNS IP The address of the iSNS server. The default address is all zeroes. iSNS Alt IP The address of the alternate iSNS server. The default address is all zeroes. iSCSI Speed iSCSI host port link speed. • auto: The proper speed is auto-negotiated. This is the default. • 1Gbps: The speed is forced to 1 Gbit/s, overriding a downshift that can occur during auto-negotiation with 1-Gbit/s HBAs. This setting does not apply to 10-Gbit/s HBAs. iSCSI IP Version • 4: iSCSI host port addresses use IPv4 format. This is the default. • 6: iSCSI host port addresses use IPv6 format. Example Show system-wide iSCSI parameters for a system using IPv4 addressing: # show iscsi-parameters iSCSI Parameters CHAP: Disabled Jumbo Frames: Disabled iSNS: Disabled iSNS IP: 0.0.0.0 iSNS Alt IP: 0.0.0.0 iSCSI Speed: auto iSCSI IP Version: 4 Success: Command completed successfully. (2012-01-18 15:05:53) 248