HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 387
drive-parameters, This basetype is used by, drive-parameters properties
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
drive-parameters This basetype is used by show disk-parameters. Table 24 drive-parameters properties Name Type Description smart smart-numeric drive-writeback-cache string uint32 string Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is enabled or disabled for disks. • Detect-Only: Each disk in the system retains its individual SMART setting, as will new disks added to the system. • Enabled: SMART is enabled for all disks in the system and will be enabled for new disks added to the system. This is the default. • Disabled: SMART is disabled for all disks in the system and will be disabled for new disks added to the system. Numeric equivalents for smart values. • 0: Detect-Only • 1: Enabled • 2: Disabled • Disabled: Disk write-back cache is disabled for all disks in the system and will be enabled for new disks added to the system. This parameter cannot be changed. drive-writeback-cachenumeric drive-timeoutretry-max drive-attempttimeout drive-overalltimeout uint32 Numeric equivalents for drive-write-back-cache values. • 0: Detect-Only • 1: Enabled • 2: Disabled uint8 Maximum number of times a timed-out I/O operation can be retried before the operation is failed. The default is 3. uint8 Number of seconds before an I/O operation is aborted and possibly retried. The default is 8 seconds. uint8 Total time in seconds before an I/O operation is failed regardless of the drive-attempt-timeout and drive-timeout-retry-max settings. The default is 105 seconds. disk-dsd-enable disk-dsdenable-numeric disk-dsdenable-pool disk-dsd-delay string uint32 string Shows whether available disks and global spares will spin down after a period of inactivity shown by the disk-dsd-delay property. • Disabled: Drive spin down for available disks and global spares is disabled. This is the default. • Enabled: Drive spin down for available disks and global spares is enabled. Numeric equivalents for disk-dsd-enable values. • 0: Disabled • 1: Enabled Not applicable. uint16 Shows the period of inactivity in minutes after which available disks and global spares will spin down, from 1-360 minutes. The value 0 means spin down is disabled. The default is 15 minutes. drive-parameters 387