HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 188

set user Description Changes user preferences for the session or permanently. The system requires at least one CLI user with the manage role to exist. NOTE: User changes take effect when the user next logs in. Syntax set user [authentication-type MD5|SHA|none] [base 2|10] [interfaces interfaces] [level monitor|manage|admin] [locale English|en|Spanish|es|French|fr|German|de|Italian|it|Japanese|ja |Korean|ko|Dutch|nl|Chinese-simplified|zh-s|Chinese-traditional|zh-t] [password password] [precision #] [privacy-password encryption-password] [privacy-type DES|AES|none] [roles roles] [session-preferences] [storage-size-base 2|10] [storage-size-precision #] [storage-size-units auto|MB|GB|TB] [temperature-scale celsius|c|fahrenheit|f] [timeout #] [trap-host IP-address] [type novice|standard|advanced|diagnostic] [units auto|MB|GB|TB] name Parameters authentication-type MD5|SHA|none Optional. For an SNMPv3 user, this specifies whether to use a security authentication protocol. This parameter requires the password parameter and, for the snmptarget interface, the trap-host parameter. • MD5: MD5 authentication. This is the default. • SHA: SHA (Secure Hash Algorithm) authentication. • none: No authentication. base 2|10 Optional. Sets the base for entry and display of storage-space sizes: • 2: Sizes are shown as powers of 2, using 1024 as a divisor for each magnitude. • 10: Sizes are shown as powers of 10, using 1000 as a divisor for each magnitude. This is the default. Operating systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2. 188