HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 293

show snapshots Description Shows information about snapshots for a specified controller, master volume, or snap pool. If no parameters are specified, information about all snapshots is shown. Syntax show snapshots [controller a|b|both] [master-volume volume] [snap-pool volume] [type standard|replication|all] Parameters controller a|b|both Optional. Shows snapshots owned by controller A only, by controller B only, or by either controller (both). If this parameter is omitted, snapshots owned by either controller are shown. master-volume volume Optional. Shows snapshots associated with the specified master volume name or serial number. For volume syntax, see "Command syntax" (page 20). snap-pool volume Optional. Shows snapshots associated with the specified snap pool name or serial number. For volume syntax, see "Command syntax" (page 20). type standard|replication|all Optional. Shows only standard (non-replication) snapshots, only replication snapshots, or snapshots of all types. If this parameter is omitted, snapshots of all types are shown. Output Vdisk Vdisk name Serial Number Snapshot serial number Name Snapshot name Creation Date/Time Date and time the snapshot was prepared or committed Status • Available • Unavailable: See the Status-Reason value. Status-Reason Shows N/A for Available status, or one of the following reasons for Unavailable status: • snapshot not found • snap pool not found • master volume not found • snapshot pending (not yet committed) • snap pool not accessible • master volume not accessible • Volume copy with modified data is in progress • Rollback with modified data is in progress • Unknown reason Source Volume Name of the volume of which the snapshot was taken Snap-pool Name Snap pool name show snapshots 293