HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 175
set replication-volume-parameters
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
set replication-volume-parameters Description Sets parameters for a specified replication volume. This command must be run separately on each system where the volume resides; changes to these parameters are not automatically synchronized across systems. Syntax set replication-volume-parameters [link-type FC|iSCSI] [max-queue #] [max-retry-time #] [monitor-interval #] [on-collision newest|oldest] [on-error retry|suspend] [priority low|medium|high] [remote-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs] [set replication-set] replication-volume Parameters link-type FC|iSCSI Optional. Specifies the type of ports being used for the inter-system link: • FC: FC ports. • iSCSI: iSCSI ports. max-queue # Optional. The number of replication images to consider when determining the next image to replicate: 1-64. Used only if the on-collision parameter is set to oldest. max-retry-time # Optional; valid only if the on-error parameter is set to retry. Maximum time in seconds to retry a single replication if an error occurs. Allowed values are 0-64000. A value of 0 means do not time out retries; that is, retry forever. By default, a retry will occur 5 minutes after an error occurs. If another error occurs and the difference in time between when the error occurs and the initial retry time is greater than the max-retry-time value, the replication will be suspended. In order to prevent a replication set from suspending when multiple independent, discontinuous errors occur during a single replication, set max-retry-time for the secondary volume either to 0 (retry forever) or to 60 minutes for each 10GB of volume size. The default is 1800 (30 minutes). monitor-interval # Optional. The interval in seconds at which the primary volume should query the secondary volume. Values less than 300 (5 minutes) or greater than 1800 (30 minutes) are not recommended. on-collision newest|oldest Optional. The collision policy to use when the image queue depth is met: • newest: Only the latest replication image should be considered for the next replication operation. • oldest: Only the latest N replication images should be considered for the next replication operation, where N is defined by the max-queue parameter and the oldest of these images should be considered first. on-error retry|suspend Optional. The error policy to use when errors occur during the replication process: • retry: Retry the operation for the time specified in the max-retry-time parameter. • suspend: Suspend the replication operation. priority low|medium|high Optional. The priority of the replication process for the replication volume: low, medium, or high. set replication-volume-parameters 175