HP MSA 1040 HP MSA 1040 CLI Reference Guide (762782-001, March 2014) - Page 71
ports, access read-write|rw|read-only|ro|no-access, no-access, read-write, baselun
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
access read-write|rw|read-only|ro|no-access Optional. Access privilege that hosts have to these volumes: read-write (rw), read-only (ro), or no-access. If no-access is specified, the volume is not mapped. The default is read-write. ports ports Optional. The controller ports through which hosts can access the volumes using LUNs specified by the baselun parameter. For port syntax, see "Command syntax" (page 20). If not all ports are specified, the unspecified ports are not mapped. If the ports and baselun parameters are omitted, the volumes are not mapped. Example Create two unmapped, 100-GB volumes with base name data- in vdisk data, and show the results: # create volume-set count 2 size 100GB vdisk data basename dataInfo: The volume was created. (data-0000) Info: The volume was created. (data-0001) Success: Command completed successfully. (2012-01-20 14:24:09) # show volume-maps Volume View [Serial Number (SN) Name (data-0000) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile not-mapped all other hosts Standard Volume View [Serial Number (SN) Name (data-0001) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile not-mapped all other hosts Standard Success: Command completed successfully. (2012-01-20 14:24:27) create volume-set 71