HP OmniBook 7150 HP OmniBook 7100/7150 Reference Guide - Not Orderable - Page 20
ASK IR amplitude shift keyed IR, or FIR Fast IR, System Devices Menu, Default - hard drive
View all HP OmniBook 7150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Introducing the OmniBook Configuring the OmniBook with the BIOS Setup Utility System Devices Menu Default PS/2 Pointing Devices Internal Pointing Devices External Fn Key Disables the internal pointing devices when an external PS/2 mouse is connected. This is required for the scroll wheel on a PS/2 mouse to function. Enables one or both built-in PS/2 devices. Sets whether left-CTRL + left-ALT on an external keyboard is interpreted as the Fn key. Auto Both Enabled IDE Controller FDD Controller Serial Port Base I/O address Infrared Port Mode Base I/O address DMA channel Front/Back Parallel Port Mode Base I/O address Interrupt DMA channel Audio (OmniBook 7100 only) SB I/O address Enables the primary (hard drive) and secondary Both (optional CD-ROM drive) controllers. Enables the floppy drive. Enabled Sets how the serial port is configured by the BIOS Enabled (specified or automatic). Sets the I/O address and interrupt. 3F8h, IRQ4 Sets how the infrared port is configured by the BIOS (specified or automatic). Disabled Sets the hardware to support SIR (Standard IR), SIR ASK IR (amplitude shift keyed IR), or FIR (Fast IR) infrared communications. (Driver installation required.) Sets the I/O address and interrupt. 2F8h, IRQ3 For Fast Ir mode, sets the DMA channel. DMA3 Sets which infrared port is active. Back Sets how the parallel port is configured by the BIOS (specified or automatic). Enabled Sets the port to normal, bi-directional, EPP, or ECP. ECP Sets the I/O address. 378h Sets the interrupt. IRQ7 For ECP mode, sets the DMA channel. DMA3 Sets how the audio system is configured by the BIOS (specified or automatic). Enabled Sets the Sound Blaster I/O address. 220h 1-12