HP Photosmart Premium Fax All-in-One Printer - C309 Full User Guide - Page 184

I am having problems faxing over the Internet using IP phone, Solution 1: Change the fax speed

Page 184 highlights

Chapter 13 1 Telephone wall jack 2 Use the phone cord supplied in the box with the product • If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the product directly to the telephone wall jack. • If your telephone system is not using a standard dial tone, such as some PBX systems, this might cause the test to fail. This will not cause a problem sending or receiving faxes. Try sending or receiving a test fax. • Check to make sure the country/region setting is set appropriately for your country/region. If the country/ region setting is not set or is set incorrectly, the test might fail and you might have problems sending and receiving faxes. • Make sure you connect the product to an analog phone line or you will not be able to send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the product to an analog phone line and try sending or receiving a fax. NOTE: If you are unsure of the kind of phone line you have (analog or digital), check with your service provider. After you resolve any problems found, run the fax test again to make sure it passes and the product is ready for faxing. If the Dial Tone Detection Test continues to fail, contact your telephone company and have them check the phone line. I am having problems faxing over the Internet using IP phone Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Change the fax speed • Solution 2: Make sure the phone cord is connected to the correct port on the product • Solution 3: Make sure the telephone company supports faxing over the Internet Solution 1: Change the fax speed Solution: If you experience problems sending and receiving faxes while using an Internet fax service, use a slower fax speed. You can do this by changing the Fax Speed setting from Fast (33600) (the default) to Medium (14400) or Slow (9600). To set the fax speed from the control panel 1. Press Setup. 182 Solve a problem Solve a problem

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244

1
Telephone wall jack
2
Use the phone cord supplied in the box with the product
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the product directly to the
telephone wall jack.
If your telephone system is not using a standard dial tone, such as some PBX systems, this might cause the
test to fail. This will not cause a problem sending or receiving faxes. Try sending or receiving a test fax.
Check to make sure the country/region setting is set appropriately for your country/region. If the country/
region setting is not set or is set incorrectly, the test might fail and you might have problems sending and
receiving faxes.
Make sure you connect the product to an analog phone line or you will not be able to send or receive faxes.
To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If
you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the
product to an analog phone line and try sending or receiving a fax.
NOTE:
If you are unsure of the kind of phone line you have (analog or digital), check with your service
provider.
After you resolve any problems found, run the fax test again to make sure it passes and the product is ready for
faxing. If the
Dial Tone Detection Test
continues to fail, contact your telephone company and have them check
the phone line.
I am having problems faxing over the Internet using IP phone
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the
first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Solution 1: Change the fax speed
Solution 2: Make sure the phone cord is connected to the correct port on the product
Solution 3: Make sure the telephone company supports faxing over the Internet
Solution 1: Change the fax speed
Solution:
If you experience problems sending and receiving faxes while using an Internet fax service, use a
slower fax speed. You can do this by changing the
Fax Speed
setting from
Fast (33600)
(the default) to
Medium
(14400)
or
Slow (9600)
.
To set the fax speed from the control panel
1.
Press
Setup
.
Chapter 13
182
Solve a problem
Solve a problem