IBM 620410U User Guide - Page 81
locked position., The rear retaining bracket rests against the computer cover. You might
UPC - 087944665410
View all IBM 620410U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
8. Remove the adapter from the static-protective package, and carefully grasp the adapter by the top edge or upper corners, and align it with the expansion slot guides; then press the adapter firmly into the expansion slot. Note: It is best to move the adapter directly from the static-protective package to the adapter slot. If this is not possible, set the adapter down on its static-protective package on a hard surface. Avoid touching the components and gold-edge connectors on the adapter. Attention: Be certain that the adapter is correctly seated in the expansion slot before you turn on the computer. Incomplete installation of an adapter might damage the system board or the adapter. Expansion slot cover Rear adapter retention bracket Adapter Front adapter retention bracket 9. Connect required cables to the adapter. Route cables so that they do not block the flow of air from the fans. 10. If you have another adapter to install, repeat steps 1 through 10. If you have another option to install, do so now. 11. If you have installed a full-length adapter, rotate the front adapter support bracket to the closed (locked) position. 12. Reinstall the rear adapter support bracket; then rotate the bracket to the closed (locked) position. Note: The rear retaining bracket rests against the computer cover. You might find it easier to lay the computer on its side to replace the cover. 13. Replace the support bracket. 14. Replace the side cover. See "Replacing the cover" on page 76 for details. 15. Reconnect the external cables and power cords; then turn on the attached devices and the computer. Chapter 5. Installing options 65