Lenovo NetVista X40 Quick Reference for NetVista 2179 and 6643 systems (Dutch) - Page 103
The Read/Write Self-diagnostic failed for device, Insert a new tape
View all Lenovo NetVista X40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Code 264 Function Magnetic tape drive 301 Keyboard 302 Mouse 305 Video monitor Result Aborted Failed Failed Failed Text message Test setup error: No tape drive found Action Check the cable and power connections to the drive. Refer to the information that is provided with the tape drive. If the problem persists, call for service. The load/mount test failed for device n on adapter m (where n is the number of the device and m is the adapter number) The self-diagnostic failed for device n on adapter m. (where n is the number of the device and m is the adapter number) Refer to the information provided with the tape drive. If the problem persists, call for service. Note: The push button test is applicable only to SCSI tape drives that have a push button. The unload/eject test failed for device non adapter m (where n is the number of the device and m is the adapter number) The unload/eject push button test failed for device non adapter m (where n is the number of the device and m is the adapter number) The Read/Write Self-diagnostic failed for device n on adapter m (where n is the number of the device and m is the adapter number) Insert a new tape cartridge; then, run the diagnostic test again. Refer to the information that is provided with the tape drive. On system-board keyboard test failed If the problem persists, call for service. 1. Verify that the keyboard cable is connected. 2. If the problem remains, replace the keyboard cable. On system-board pointing device test failed. Any message If the problem persists, call for service. Replace the pointing device. If the problem persists, call for service. Refer to the information that came with the monitor. Chapter 6. Solving problems 87