Lenovo NetVista X40 Quick Reference for NetVista 2179 and 6643 systems (Dutch) - Page 86
Connecting external options, documentation that comes with your options.
View all Lenovo NetVista X40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Note: The illustrations in this document might differ slightly from your hardware. Complete the following steps to install the computer cover. 1. Clear any cables that might impede the replacement of the cover. 2. Position the cover over the computer and pivot the cover down until the cover snaps into place. 3. Lock the cover, if required. 4. Reconnect the external cables and power cords to the computer; then, plug the power cords into electrical outlets. 5. Turn on all attached devices; then, turn on the computer. Connecting external options You can attach a SCSI storage expansion enclosure to your computer. To attach an external device: 1. Read "Before you begin" on page 37, review the safety precautions listed in Statement 1 and Statement 5 in "Safety information" on page 39, and read the documentation that comes with your options. 2. Be sure your computer and all attached devices are turned off. 3. Follow the instructions that come with the option to prepare it for installation and to connect it to the computer. Note: If you are attaching a SCSI device, see "Ultra160 SCSI connector (some models)" on page 75 for SCSI ID and cabling information. 70 IBM® IntelliStation® E Pro: User's Guide IntelliStation E Pro Types 6836, 6846