Netgear SRXN3205 SRXN3205 Reference Manual - Page 189

Monitoring VPN Tunnel Connection Status, VPN > Connection Status

Page 189 highlights

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual The status window displays the following information: Item Rule LAN IP Address Open Ports Time Remaining Description The name of the port triggering rule associated with this entry. The IP address of the PC currently using this rule. The Incoming ports which are associated the this rule. Incoming traffic using one of these ports will be sent to the IP address above. The time remaining before this rule is released and made available for other PCs. This timer is restarted whenever incoming or outgoing traffic is received. Monitoring VPN Tunnel Connection Status To review the status of current VPN tunnels: 1. Select VPN > Connection Status from the main/submenu, and then select the IPsec VPN Connection Status tab. The IPsec Connection Status screen displays. Figure 11-11 The Active IPsec SAs table lists each active connection with the following information. Item Policy Name Endpoint Tx (KB) Tx (Packets) State Action Description The name of the VPN policy associated with this SA. The IP address on the remote VPN endpoint. The amount of data transmitted over this SA. The number of IP packets transmitted over this SA. The current status of the SA. Phase 1 is Authentication phase and Phase 2 is Key Exchange phase. Use this button to terminate/build the SA (connection) if required. Monitoring System Performance v1.0, October 2008 11-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance
11-13
v1.0, October 2008
The status window displays the following information:
Monitoring VPN Tunnel Connection Status
To review the status of current VPN tunnels:
1.
Select
VPN > Connection Status
from the main/submenu, and then select the IPsec VPN
Connection Status tab. The IPsec Connection Status screen displays.
The Active IPsec SAs table lists each active connection with the following information.
Item
Description
Rule
The name of the port triggering rule associated with this entry.
LAN IP Address
The IP address of the PC currently using this rule.
Open Ports
The Incoming ports which are associated the this rule. Incoming traffic using one
of these ports will be sent to the IP address above.
Time Remaining
The time remaining before this rule is released and made available for other
PCs. This timer is restarted whenever incoming or outgoing traffic is received.
Figure 11-11
Item
Description
Policy Name
The name of the VPN policy associated with this SA.
Endpoint
The IP address on the remote VPN endpoint.
Tx (KB)
The amount of data transmitted over this SA.
Tx (Packets)
The number of IP packets transmitted over this SA.
State
The current status of the SA. Phase 1 is Authentication phase and Phase 2 is
Key Exchange phase.
Action
Use this button to terminate/build the SA (connection) if required.