Netgear SRXN3205 SRXN3205 Reference Manual - Page 70

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual - IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0. - RADIUS Port. The port number of the RADIUS Server. The default is 1812. - Shared Key. This is shared between the VPN firewall and the RADIUS Server while authenticating the supplicant (wireless client). 5. Click Apply to save your settings. Verifying Wireless Connectivity (Security) Using a Client PC with an 802.11b/g/n or 802.11a/n wireless adapter with the correct wireless and security settings for connection to the SRXN3205 (SSID, WEP/WPA, MAC ACL, etc.), verify connectivity by using a browser such as Mozilla Firefox, Netscape, or Internet Explorer to browse the Internet, or check for file and printer access on your network. The SSID of any wireless access adapters must match the SSID configured in the ProSafe Wireless-N VPN Firewall. If they do not match, no wireless connection will be made. Note: If you are unable to connect, see Chapter 12, "Troubleshooting." Deploying the firewall Once you deploy your firewall in its final location, retest the SRXN3205 to ensure it is still operating properly. To deploy the firewall: 1. Disconnect the SRXN3205 and position it where it will be deployed. The best location is elevated, such as, on the top of a cubicle or wall mounted at the center of your wireless coverage area, and within line of sight of all the mobile devices. 2. Position all the antennas for the best coverage in your situation. Note: Refer to the antenna positioning information in "Wireless Equipment Placement and Range Guidelines" on page 4-2 earlier in this chapter. 3. Connect an Ethernet cable from the WAN connection on your firewall to a LAN port on your router, switch, or hub. 4-16 v1.0, October 2008 Wireless Configuration