Netgear SRXN3205 SRXN3205 Reference Manual - Page 80
Table 5-2., Inbound Rules continued
UPC - 606449057461
View all Netgear SRXN3205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual Table 5-2. Inbound Rules (continued) Item Description WAN Users These settings determine which Internet locations are covered by the rule, based on their IP addresses. Select the desired option: • Any - All Internet IP address are covered by this rule. • Single address - Enter the required address in the start field. • Address range - If this option is selected, you must enter the start and end fields. WAN Destination IP Address Log This setting determines the destination IP address applicable to incoming traffic. This is the public IP address that will map to the internal LAN server; it can either be the address of the WAN1 or WAN2 ports or another public IP address. This determines whether packets covered by this rule are logged. Select the desired action: • Always - Always log traffic considered by this rule, whether it matches or not. This is useful when debugging your rules. • Never - Never log traffic considered by this rule, whether it matches or not. Note: Some residential broadband ISP accounts do not allow you to run any server processes (such as a Web or FTP server) from your location. Your ISP may periodically check for servers and may suspend your account if it discovers any active services at your location. If you are unsure, refer to the Acceptable Use Policy of your ISP. Remember that allowing inbound services opens holes in your firewall. Only enable those ports that are necessary for your network. It is also advisable to turn on the server application security and invoke the user password or privilege levels, if provided. 5-6 Firewall Security and Content Filtering v1.0, October 2008